Motul brand oil is considered one of the best on the market as it is of the highest quality, thus generating less friction and reducing the chances of residues damaging internal parts and bearings.
Before buying any Motul oil, first find out which of them is the best for you to use, since it is not the same to drive on the road than on competition terrain, for example. We solve your doubts!

Motul Scooter Expert 4T MA 10W-40



MOTUL SCOOTER EXPERT 4T 10W40 MA is an oil for 4-stroke scooter engines based on MOTUL Technosynthesis?. Exceeds the requirements of scooter manufacturers who prescribe SAE 10W-40 viscosity in combination with JASO MA for modern mini and maxi scooters.



SPECIFICATIONS/STANDARDS:

STANDARDS: API SM/SL/SJ

APPROVALS: JASO MA No. M033MOT105



JASO (Japan Automobile Standards Organization) has developed its own standard for 4-stroke motorcycle engine oils, JASO T 903. The MA, MA1 and MA2 gradations make it easy to select motorcycle engine oils have been specially developed for wet clutches. JASO MA2 stands for the highest friction values and therefore optimum clutch compatibility when changing gears, during the acceleration phase and also at constantly high speeds.



Advantage:

- The easy-to-handle viscosity allows for particularly fast greasing during cold starts, saves fuel and protects the starter motor and battery from premature wear.

- Excellent antioxidant, anticorrosive and antifoam properties

- The optimized content of sulfur and phosphorus guarantees the long-term operation of the catalysts.

- Low evaporation loss reduces oil consumption.

- Perfect protection against wear even under difficult operating conditions, eg in stop-and-go traffic.

- Specially adapted filler tube for comfortable and leak-free filling even with very small oil filler openings.



RECOMMENDATIONS AND NOTES:

Change the interval according to the vehicle manufacturer's specifications or adjusted according to the operating conditions. Before use, always observe the service documents and the manufacturer's recommendations!



Properties:

Color (visual) brown

Viscosity SAE J 300 10W-40

Density at 20°C ASTM D 1298 0.866

Viscosity at 100°C ASTM D 445 14.8 mm²/s

Viscosity at 40°C ASTM D 445 102.1 mm²/s

Viscosity index ASTM D 2270 151

Pour point ASTM D 97 -35°C

Flash point ASTM D 92 226°C

TBN ASTM D 2896 10.1 mg KOH/g
APPLICATION: ENGINE
VISCOSITY: 10W40
TYPE: 4-STROKE
QUALITY: SYNTHETIC
JASO APPROVALS: MA
API SPECIFICATION: SL
CONTENT: 1 LITERS