BOTTLES

Diving tanks


The diving bottles they store air or any other mixture of gases that allow you to breathe underwater without any problem.


Each of these bottles has a typical capacity marked in liters as a whole of a maximum working pressure reflected in atmospheres, and both its manufacture and its use comply with a series of strict safety regulations.


Types of diving cylinders


When you go to buy a diving bottle you must take into account the material with which it has been manufactured. Mainly There are two types:


- Steel scuba tanks


Their base is convex, so they need a rubber band to hold on to. In addition, it serves as protection and they stand out for their surprising mechanical resistance and for the low tendency to buoyancy when the bottle is empty.


Its biggest defect is poor resistance to corrosion; if the water enters inside or if the oil and water separator of the compressor does not work, corrosion can immediately reduce the thickness of the steel wall.


- Aluminum scuba bottles


They have the virtue of being lighter and not rusting. In salt water, they have the possibility of being attacked by electrolysis. Nevertheless, are primarily used for tropical climates.


Because compressors cannot completely remove moisture from the air, they are often position in the first and only tanks that most tropical dive centers have.


Scuba tank storage capacity


The sizes of scuba bottles can be very varied and, although they usually have standard measurements, many depend on the material with which they were made. Nevertheless, the smallest usually have only 6 liters, while the largest have the possibility of covering up to 18 liters.


One of the most used measures contains especially the 12 liters, but, in general, they have the possibility of getting to store from 2,000 to 3,600 liters of wind at atmospheric pressure.


What are scuba bottles used for?


The diving bottles are used to store atmospheric air at a pressure of 200 or 300 bar, making it the oxygen dispenser you need once you''re underwater. Without it, you will not get very far in the world of diving.


In the upper part, the bottles have a particular tap whose purpose is to distribute the oxygen. A pressure regulator coupling is added to this tap so that the minimum possible loss of air occurs.


Surely, at first, it will seem like little oxygen until you regulate your breathing underwater. In this aspect, we recommend that you always consider that diving is a sport and that you are doing physical exercise. In addition, high pressure leads you to consume a greater amount of oxygen.


Refillable scuba tanks


The diving bottles They are usually rechargeable, you just have to go to a certified center for this type of activity and make sure that the bottle complies with current regulations for compressed air containers before proceeding to recharge.


you shall have the hydrostatic test certificate and visual inspection according to the recent requirements of your territory. In the case of larger ones, it is an administrative procedure because they are recharged in authorized centers.


The costs of the recharge vary depending on the size and the center to which you take it, existing air refills at 200 bar for 8-litre cylinders for 8 euros, rising to 13 euros for those up to 18 litres..


Deals on scuba oxygen cylinders


Find an extensive variety of products in diving bottles and discover the best offers so that your diving equipment is unforgettable at Scubatec. You can choose between 3, 5, 7, 10, 12 and 15 liter steel bottles with a working pressure of 200, 232 or 300 bar.


Also, You will have aluminum diving cylinders of 1, 2, 3, 5.55, 7, 10 and 11.1 liters with a working pressure of 200 to 230 bar. Remember that on the surface the steel ones are usually lighter and in the water the aluminum ones provide neutral buoyancy.


Buy diving bottles


in scubatic We have a wide variety of models, colors, sizes, storage and long-lasting diving bottles., which you can obtain instantly, easily and at the best price online.


FOR buy scuba bottles that meet all the needs and functionality that scuba diving requires, you should not only take into account the price, but also the specifications and functionality of the diving bottle to enjoy the deep sea without putting your integrity and safety at risk.


Do you need to buy bottles to dive and you don''t know which one to decide on? Scubatic advises you.

Diving and diving tanks - Scubatic
Showing 25 results
Sort by:
Marca
red para botella de buceo de 12l

red para botella de buceo de 12l

14.71€
🟩 Inmediato🟩 Inmediato
Envío o recogida inmediata
Marca
red para botella buceo  15lt

red para botella buceo 15lt

14.71€
🟩 Inmediato🟩 Inmediato
Envío o recogida inmediata
Marca
red para botella buceo  10lt

red para botella buceo 10lt

14.71€
🟩 Inmediato🟩 Inmediato
Envío o recogida inmediata
Marca
valvula para traje de neopreno xr line

valvula para traje de neopreno xr line

99.32€
🟩 Inmediato🟩 Inmediato
Envío o recogida inmediata
Marca
conector accesorios magnético mares - sistema de fijación único para buceo

conector accesorios magnético mares - sistema de fijación único para buceo

17.84€
🟢 Disponible
Plazo de entrega variable
Marca
corta arneses de aluminio ss316 xr line

corta arneses de aluminio ss316 xr line

35.12€
🟢 Disponible
Plazo de entrega variable
Marca
adaptador de deposito unico staxr xr line

adaptador de deposito unico staxr xr line

45.44€
🟢 Disponible
Plazo de entrega variable
Marca
sistema de lastre scuba ranger

sistema de lastre scuba ranger

39.11€
🟢 Disponible
Plazo de entrega variable
Marca
malla de protección para botella de buceo
10LTS

malla de protección para botella de buceo

11.21€
🟢 Disponible
Plazo de entrega variable
Marca
malla de protección para botella de buceo
10LTS

malla de protección para botella de buceo

11.21€
🟢 Disponible
Plazo de entrega variable
Marca
malla de protección para botella de buceo
10LTS

malla de protección para botella de buceo

11.21€
🟢 Disponible
Plazo de entrega variable
Marca
malla de protección para botella de buceo compatible con mezcla nitrox 12lts

malla de protección para botella de buceo compatible con mezcla nitrox 12lts

11.21€
🟢 Disponible
Plazo de entrega variable
Marca
red de protección para botella nitrox 10lts

red de protección para botella nitrox 10lts

11.21€
🟢 Disponible
Plazo de entrega variable
Marca
red de protección para botella nitrox 15lts

red de protección para botella nitrox 15lts

11.21€
🟢 Disponible
Plazo de entrega variable
Marca
red de protección para botella nitrox 18lts

red de protección para botella nitrox 18lts

11.21€
🟢 Disponible
Plazo de entrega variable
Marca
botella de buceo con asa 1 salida 10l 232bar

botella de buceo con asa 1 salida 10l 232bar

330.00€
🟢 Disponible
Plazo de entrega variable
Marca
botella de buceo con asa 2 salidas 12l 232bar

botella de buceo con asa 2 salidas 12l 232bar

434.50€
🟢 Disponible
Plazo de entrega variable
Marca
recambio marco para mascara de buceo pure wire

recambio marco para mascara de buceo pure wire

8.68€
🟢 Disponible
Plazo de entrega variable
Marca
recambio marco para mascara de buceo pure wire

recambio marco para mascara de buceo pure wire

8.68€
🟢 Disponible
Plazo de entrega variable
Marca
recambio marco para mascara de buceo pure wire

recambio marco para mascara de buceo pure wire

8.68€
🟢 Disponible
Plazo de entrega variable
Marca
recambio marco para mascara de buceo pure wire

recambio marco para mascara de buceo pure wire

8.68€
🟢 Disponible
Plazo de entrega variable
Marca
recambio marco para mascara de buceo pure wire

recambio marco para mascara de buceo pure wire

8.68€
🟢 Disponible
Plazo de entrega variable
Marca
recambio marco para mascara de buceo pure wire

recambio marco para mascara de buceo pure wire

8.68€
🟢 Disponible
Plazo de entrega variable
Marca
regulador de buceo segunda etapa lp swivel xr line

regulador de buceo segunda etapa lp swivel xr line

72.62€
🟢 Disponible
Plazo de entrega variable
Marca
recambio piston regulador twin balanced dry 52x-15x-25xr

recambio piston regulador twin balanced dry 52x-15x-25xr

56.24€
🟢 Disponible
Plazo de entrega variable
Loading...

Back to top