RFX Universal cable greaser RACE 1128713

The RFX Race Series tools are a selection of high-quality tools that will allow you to perform all maintenance work on your off-road motorcycle. Made with the finest materials, such as chrome vanadium and other high-strength steels, the RFX Race Series tools are suitable for both amateur and professional mechanics.
Sealed around the inner cable and outer sleeve.
Suitable for a wide range of cable sizes.
Allows lubricant to be injected into the cables.
Accepts a wide variety of nozzle types.
Once the lubricant flows freely out the other end, the cable is lubricated.
Instructions for use:
Slide the rubber cap down and loosen the cable adjustments to release it.
Remove the throttle housing or clutch lever bracket and remove the cable.
Remove the cable from its lower position on the carburetor, throttle body, or clutch arm.
Open the cable grease nipple and place it into the inner sleeve.
Slide the outer cable sleeve into the cable lug and tighten the large screw on top.
Using a can of lubricant, insert the nozzle (use an extension if necessary) into the cable lubricator and spray.
Spray until the lubricant flows freely from the bottom end of the cable.
Replace the cable by reversing the steps used to remove it.
Once installed, check and adjust the cable slack, making sure to rotate the handlebars to both sides to their maximum position.