rev counter cable 734.02.35

Our cables and shafts are mainly made in Europe.

The running smoothness is improved with special oils, greases or coatings. As a rule, a high-quality silicone oil is used for the cables in order to reduce manual forces. This oil permanently lubricates and does not dry out. The axles slide in a long-lasting calcium grease.

To increase our delivery capacity and reduce your stock,

we have combined certain speedometer and tachometer shaft lengths into

lengths in steps of maximum 4.5 cm each. This

This means that some axles are up to 4.5 cm longer than the original axle.

Your advantage: With just a few rods you can cover the entire range.
TYPE OF CONNECTION 1: A
1 INTERNAL CABLE CONNECTION: SQUARE 2.6 MM
CONNECTION 1 MEASURES: M12 MM
CONNECTION 1 SPECIALTIES: NO SPECIALTY
CONNECTION TYPE 2: B
CONNECTION 2 INNER CABLE: SQUARE 2.6 MM
CONNECTION 2 SIZES: 18.5 MM
CONNECTION 2 SPECIALTIES: HEAT PROTECTION
LENGTH: 729MM
INTERNAL CABLE LENGTH: 754 MM


APPLICATIONS OF THIS PRODUCT:
According to the data provided by the manufacturer, this article is compatible with the following brands, models and years:
Yamaha DT 80 LC II 9,5 CV, 7 kw 1cil. 53V 2RA Bastidores: 53V henceforth30101-53V henceforth40000 1987-1989
Yamaha DT 80 LC II 9,5 CV, 7 kw 1cil. 53V 3WC1 Bastidores: 53V henceforth40101-53V henceforth50000 1990-1991
Yamaha DT 80 LC II 9,5 CV, 7 kw 1cil. 53V 4ED1 Bastidores: 53V henceforth50101-- 1992-1997
Yamaha DT 80 LC II 9,5 CV, 7 kw 1cil. 53V 53V Bastidores: 53V henceforth00101-53V henceforth07701 1985-1986