HYMEC Clutch replacement RELEASE CYLINDER
INCLUDED LENGTH: 55 mm
MOUNTING SIZE: 70mm to 72mm
If you own an older HYMEC coupling system and one
Replacement slave cylinders require reference to current part number
However, we are not sure that we have developed a method that allows you to
Finding the replacement part number easier.
Remove the slave cylinder from the motorcycle and press the button
master cylinder until the slave cylinder operating rod is fully
He's withdrawn. The piston in the slave cylinder now touches the brass cap.
at the rear of the slave cylinder. If the slave cylinder
stopped working, it can be removed from the pressure line
and the drive rod for measuring slowly and carefully
be inserted into the slave cylinder.
Please note that the measured length is not the operating length
corresponds to - working length is 16 mm longer than retracted
Length. After the measurement, dispose of your old slave cylinder.
not yet, because you may still need the lid or stand.
All MAGURA HYMEC replacement slave cylinders come standard with cap
and standard key as shown in the pictures.
If the slave cylinder needs between two operating lengths
always order the longest version and use
Spacer between support and Bowdenzugbefestigung to the operating length
to adapt to your motorcycle.
729.01.01
10 Items